Working with rounds is a lot different than working with square timbers. Layout is completely different: working off of chalk lines and carving the rounds down to square posts at the joinery took a lot longer than just working with square timbers.

Making the braces was a challenge in precision – getting the square part carved perfectly to fit the housing and then adding 45 degree cuts in the end really gave me a challenge! I cut all of the log joinery using a chainsaw to rough out the joints and then cleaned them up with an angle grinder fitted with a sanding disk.

The customer really liked the round look, so we used round logs for the posts and braces to give the house an open concept log home feel. However, since the square beams were faster to layout and cut, the hybrid of both square with round was the solution we came up with to work within budget.

This home will be an off-grid straw bale home, with clay plaster.

 

EH