Here is the same project of earthen plaster on woodchip/clay walls. You can see these are interior walls, and the clay plaster is still in the process of drying.
Once the walls are dry, an amazing thing about using clay plaster is that it is hygroscopic, meaning it absorbs excess moisture and releases it slowly, providing a more even moisture content in the air. Continue reading Interior Woodchip Clay Wall
Here is a neat photo of the “truth window” for the clay/fibre walls of this building. It’s a large truth window, showing both the clay/fibre mixture and the internal framing of the wall.
The truth window is located just above the stairwell, so anyone going upstairs in this building will see it at the top of the stairs. For those who can’t believe the inside of these walls are built from wood, clay soil, and woodchips — there is the proof! Continue reading Woodchip Clay Truth Window
A woodchip clay wall that was made by infilling the woodchip/clay mixture into plywood forms, then removing the forms to allow the wall to dry. This was part of a large project in Winlaw. The infill walls were done two years ago by Cindy Walker and Peggy Frith, and now the homeowners are ready to do the earthen plaster.
This photo shows the interior walls, which are 3.5 inches thick (framed with 2x4s). The exerior walls are 12 inches thick, to provide a much higher level of insulation and thermal mass. Continue reading Woodchip Clay Using Forms
This is a close up photo of one way to build the form work for a woodchip clay wall system. The thin strips of wood (called lath) will keep the woodchip clay mixture in the wall as well as provide a strong foundation for the coat of earthen plaster to adhere to as it is applied to the wall.
Woodchip clay walls systems involve mixing a clay slurry (either clay soil or just clay with water) with woodchips or long wood shavings. Then the mixture is packed loosely into forms, leaving small air pockets as thermal breaks. The wood fibre provides the tensile strength of the mixture and some of the insulating property, and the clay provides thermal mass and moisture content mitigation. Continue reading Woodchip Clay Lath
I’m going to be helping finish plaster an office/workshop over the next few weeks. It’s a large structure built with Durisol blocks on the main floor and woodchip/clay infill walls on the second storey.
I wanted to show a few “before” shots of the walls so you can get a sense of a couple of different options for building woodchip/clay walls. The woodchip/clay infill was done by Peggy Frith and Cindy Walker – two amazing natural builders in the Slocan Valley.
Check out the next couple of blogs for close up photos of the infill walls and explanations of the different styles. Continue reading Natural Plastering Project June 2012